change voltage from 0 to 5 change encoder velocity to 20% ( from 0.78 to 0.79) with this range of 20% how i can change feed from 0-150%?
On Sat, Jun 7, 2014 at 6:43 PM, a k <pccncmach...@gmail.com> wrote: > Hello > I did connect everything. > Card THCAD power ON i can see 1 led light is ON and second one blinking > every 1-2 second > i did check > > --Then (if you are using Axis) Machine -> Halmeter and look at the pin > -called hm2_5i20.0.encoder.03.velocity and you should see it change as > ---the THCAD sees a varying input voltage. > yes there is changing numbers > when potentiometer in max position number -0.97 > and when it in min position number -0.78 > also yes number constantly changing from 3rd figures to back. > i understand that scale number is important - right now -as an example it > is > 12345 > > right now i want to know in general range of figures --like -0.97 should > be under the 1. or above etc > > how low -0.78 should be ? down to what? > Also i think that with potentiometer i should be able to move cursor - > feed - > on Axis display. > am i right? because this is final target > > thank you > aram > > > > > > > > > On Fri, Jun 6, 2014 at 3:09 AM, andy pugh <bodge...@gmail.com> wrote: > >> On 6 June 2014 10:02, a k <pccncmach...@gmail.com> wrote: >> >> > >> > i did check +5V from power supply to see if voltmeter works >> > my cnc mill working everything is good but why i could not detect +5V >> from >> > pins 40 and 43? >> >> >> Maybe you are counting from the wrong end? Pin 1 has a square pad on the >> reverse of the circuit board. >> >> http://www.mesanet.com/pdf/motion/7i33man.pdf >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> ------------------------------------------------------------------------------ >> Learn Graph Databases - Download FREE O'Reilly Book >> "Graph Databases" is the definitive new guide to graph databases and their >> applications. Written by three acclaimed leaders in the field, >> this first edition is now available. Download your free book today! >> http://p.sf.net/sfu/NeoTech >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/NeoTech _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
