On 7/14/14 09:12 , Gene Heskett wrote: > Greetings all; > > Slowly stumbling around but gradually making progress at carving up a hal > file to work with a 5i25. > > My latest showstopper is: > > Starting LinuxCNC... > my_LinuxCNC_machine.hal:64: Pin 'axis.2.home-sw.in' does not exist > Shutting down and cleaning up LinuxCNC... > > And yet the .ini file says: > [DISPLAY] > DISPLAY = axis > > Ideas? The all software version of the config works, and has that pin.
The pins named "axis.*" don't come from the GUI named Axis, they come from the low-level "motion" component, aka motmod. Could it be that component hasn't been loaded yet? -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck® Code Sight™ - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users