I gather from the first post that aram wants to integrate a 'depositor' and a milling machine.
Here a very fine example(laser) of that; https://www.youtube.com/watch?v=s9IdZ2pI5dA Roland On 30 July 2014 10:37, Gregg Eshelman <g_ala...@yahoo.com> wrote: > On 7/29/2014 6:40 PM, Jon Elson wrote: > > > Yes, and welder - that means the guy who knows welding, not > > the machine - knows and fights warpage every day, and knows a bunch of > > tricks to prevent or at least control it. Clamping to a rigid table > > and stitch welding are the most common tricks. Stitch welding is to > make a > > number of short welds on a seam, rather than just plowing along in a > > straight line from one end to the other. > > Weldor is the person holding the thing that gets hot. Welder is the > thing that gets hot. ;) > > Same as sailer is the floating thing the sailor rides on. > > Somewhere around I have an old copy of the Craftsmen "Oxy-Acetylene > Weldor's Handbook". > > Odd thing is a person who drives a vehicle is a driver, not a drivor. > Perhaps because the vehicle is a car or truck or wagon instead of a > driver. If that conveyance in your driveway (that you park on before > taking off for a drive on the parkway) was commonly called a driver then > you'd be a drivor upon getting in the *ahem* drivor's seat. > > --- > This email is free from viruses and malware because avast! Antivirus > protection is active. > http://www.avast.com > > > > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users