On 9/22/14 1:19 PM, Joe Hildreth wrote: > The image on section 5.2 (Figure 5.2: Basic information Page) shows 20,000 ns > for both Direction Hold and Direction Setup. The definitions below for > Direction Hold and Direction setup suggest 200,000 ns as a default value if > you don't know the timing information. Should this read 20,000 like the > image, or should the image be fixed to reflect 200,000.
Can you see if this is fixed and less confusing in 2.6.3-24 (currently on the linuxcnc.org/docs website)? -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
