On 27 September 2014 20:20, Ricardo Moscoloni <rmoscol...@gmail.com> wrote:
> To Sam: will test the new name, wondering what force the name change. Two things: There is a HAL component called "comp" so there was scope for confusion. More seriously, if you _didn't_ have linuxcnc-dev installed then the message from Linux used to be: "The program 'comp' can be found in the following packages: * mailutils-mh * nmh Try: sudo apt-get install <selected package>" Which was a nice explicit instruction, but wrong. And lots of users were doing that and getting nowhere. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users