I looked at the face of the slope and think it was done :- endmill the path along arrow http://www.collection.archivist.info/archive/mirror/03-620-Locknut,%20Magneto,lv-gec.jpg
then rotate around A 90 rinse repeat Dave Caroline On 13/10/2014, andy pugh <bodge...@gmail.com> wrote: > http://www.geutskens.eu/neracar/images/PPL/6-Engine/6-Foot%20Starter%20Assy/03-620-Locknut,%20Magneto,lv-gec.jpg > > I am struggling to come up with a plausible setup to machine a few of > these. (It is a Ner-a-Car starter clutch). > > I have a CNC mill with a tilting 4th-axis and also a swivelling head. > I suspect that the ideal tool would be a very shallow-angle dovetail > cutter. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
