2014-10-20 19:26 GMT+03:00 Chris Radek <ch...@timeguy.com>: > On Mon, Oct 20, 2014 at 04:05:06PM +0100, andy pugh wrote: > > On 20 October 2014 15:39, Chris Radek <ch...@timeguy.com> wrote: > > > > > I admit I used halmeter and not the docs... I think they are > > > > > > #define EMC_MOTION_TYPE_TRAVERSE 1 > > > #define EMC_MOTION_TYPE_FEED 2 > > > #define EMC_MOTION_TYPE_ARC 3 > > > #define EMC_MOTION_TYPE_TOOLCHANGE 4 > > > #define EMC_MOTION_TYPE_PROBING 5 > > > #define EMC_MOTION_TYPE_INDEXROTARY 6 > > > > gitweb grep doesn't show your defines. But if that is what you saw > > with an actual machine, then motion.motion-type looks like exactly the > > thing to use. > > > http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob;f=src/emc/nml_intf/motion_types.h;h=8d9a430a09e002cb32f76b844ddfc7e0a2bcac17;hb=9f04c26dcc6705e1a9a33d3b4185bf4b607e236c > > I just put motion.motion-type pin to pyvcp panel on 2.6.3 in virtualbox where I'm testing CL for my turret. It shows 1,2,3 and 5, but during toolchange (M06 T0x) it remains 0. Some extra conditions required?
-- Andrew ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
