All,
I have a beaglebone/machine kid working with a machine using grantrykins.
I have made a wireless pendant for the machine using an arduino and
linuxcnc python interface.
everything works great except I cannot figure out any way to incrementally
jog the gantry in world/axis mode.
I can jog it just fine in joint mode, but this won't work for a gantry axis
for obvious reasons.
I have discovered that I can send jog commands to both joints one right
after the other and they will move somewhat together, but does not seem
like a good idea in case one of the commands fails and leads to racking.
does anyone have a solution/fix to get it to let me jog a world axis
incrementally?
thanks.

-- 
Josiah Morgan, P.E.
------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to