On 11/24/2014 07:26 PM, Leonardo Marsaglia wrote: > 2014-11-24 22:19 GMT-03:00 Leonardo Marsaglia <leonardomarsagli...@gmail.com >> : >> It's tempting also ,in my case, to machine a 360 teeth gear and use these >> sensors only. If they do the trick it's a good solution too. >> > Mod 1.0 is like 362 mm in diameter. So unless the sensors are capable of > sense it, it's not worth it to make the gear. > > The Allegro sensor is designed to sense gear teeth down to, I think, 1 mm wide. The optimal gear tooth profile is in the spec sheet for the sensor.
Jon ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users