Any thoughts on what the best thing is to clean the printed circuit board on a Fanuc servo drive. The VTL I am installing right now has the two drives in the control cabinet, and the one is covered with a nasty brown oily residue, and I would like to get it cleaned off before I put power to it.
I have a few things on hand, first one is https://www.chemtronics.com/p-813-pow-r-wash-pr.aspx and the other is this https://www.chemtronics.com/p-739-electro-wash-cz.aspx. Would either one those be a good candidate, or should I look for something else. -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users