On 01/23/2015 03:37 AM, MH wrote: > Hello, > > could somebody include a sidenote in the servo-to-go stg documentation here > http://www.linuxcnc.org/docs/html/drivers/servo_to_go.html > that the opamps on the stg card do not work with all newer atx power > supplies that use modern switch mode DC-DC converters?
Hi Max, thanks for this info. I added a blurb, it's building right now and will show up here within the hour or so: http://www.linuxcnc.org/docs/2.6/html/drivers/servo_to_go.html -- Sebastian Kuzminsky ------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users