On 27 March 2015 at 03:10, Igor Chudov <[email protected]> wrote: > My question is, can I use this table as 4th and 5th axis, software-wise?
Yes, if it will fit on the machine and the table can lift the weight then LinuxCNC can handle the software and control. You might need to think about how you want to control it. In theory the "right" way is in a tool-centred coordinate system with tailored kinematics. But 5-axis CAM software is expensive and you might find that you prefer to program the rotaries by hand in a trivial kinematics. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
