I'm not sure that this is safer, starting the spindle implies that it will speed up, starting the job with no spindle is messier...
-----Original Message----- From: Jon Elson [mailto:el...@pico-systems.com] Sent: 01 April 2015 17:10 To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] LCNC sends Spindle to zero speed on stop. On 04/01/2015 07:19 AM, andy pugh wrote: > On 1 April 2015 at 12:32, Belli Button <be...@iafrica.com> wrote: >> When I stop a program, LCNC sends my spindle speed to zero > I think that is normal (and standard). > It is the way my system works, too. it is annoying. If doing stuff manually, I start the spindle with MDI M03 S2720 or something, then stop it with F9. If I hit F9 again, the relay to start the spindle is turned on, but the speed is set to 0. Kind of annoying, but safer. it would be kind of nice if clicking F9 again would start the spindle at the last speed, but I can see there is a safety issue there. Jon ---------------------------------------------------------------------------- -- Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
