On 15 June 2015 at 03:05, Gene Heskett <[email protected]> wrote: > There is not room on the spindle for a taperlock,
My servo motors have a tapped hole in the end of the spindle, and I used this to make my own taperlock. I bored out the pulley with a tapered bore (on my lathe, which might be a bit of a catch-22 for you) and then made a thin sleeve with a matching taper that was split and then fitted to the motor spindle/ A bolt then pulls the pulley down on to the taper, squeezing it down onto the servo shaft and locking the pulley to it. It has worked well so far. It is possible to bore a taper on a CNC milling machine but you need a boring and facing head. http://www.cnczone.com/forums/vertical-mill-lathe-project-log/109301-cnc-post1357394.html#post1357394 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
