Thank you very much. The actuators seem pretty cool. I'll pipe back up once I get some experience with it.
On Sat, Jul 25, 2015 at 6:26 AM, Andrew <pkm...@gmail.com> wrote: > Hi Curtis, > > I found this on the net > https://www.dropbox.com/s/7fobhnnc20htjvo/HA-600%20Series.pdf?dl=0 > Always liked their actuators but never had a chance to test one. > > Cheers, > Andrew > > 2015-07-25 1:22 GMT+03:00 Curtis Dutton <curtd...@gmail.com>: > > > I recently acquired an HA-600-2 servo driver as well as a servo actuator > > that accompanies it. The only trouble, it didn't come with any wires, and > > no manual. I can't find it on the net and so far the HarmonicDrive people > > haven't gotten back to me about my request. > > > > Does anyone happen to have a pdf or a manual? > > > > > > Thanks, > > Curtis > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > -- > Andrew > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users