On 08/03/2015 07:48 AM, andy pugh wrote: > On 3 August 2015 at 15:31, lloyd wilson <[email protected]> wrote: > >> Anyone have any suggestions about chasing this gremlin? > > Have a look in the dmsg log after it happens. There might be a clue there. > > I assume you are using some sort of helper hardware? (Pico / Mesa / ? ) >
I'm wondering if setting debug can help. See "DEBUG = ... " here: http://www.linuxcnc.org/docs/html/config/ini_config.html This is in my .ini file ... [EMC] MACHINE = tormach_mill #DEBUG = 0 # Debug level, 0 means no messages. See src/emc/nml_intf/debugflags.h for others #DEBUG = 0x00000002 # configuration #DEBUG = 0x7FFFFFFF #DEBUG = 0x7FFFDEFF #no interp,oword #DEBUG = 0x00008000 # py only #DEBUG = 0x0000E000 # py + remap + Oword #DEBUG = 0x0000C002 # py + remap + config DEBUG = 0x0000C100 # py + remap + Interpreter #DEBUG = 0x0000C140 # py + remap + Interpreter + NML msgs #DEBUG = 0x0000C040 # py + remap + NML #DEBUG = 0x0003E100 # py + remap + Interpreter + oword + signals + namedparams #DEBUG = 0x10000000 # EMC_DEBUG_USER1 - trace statements #DEBUG = 0x20000000 # EMC_DEBUG_USER2 - trap into Python debugger #DEBUG = 0x7FFFFFFF #DEBUG = 0x10008000 # USER1, PYTHON #DEBUG = 0x30008000 # USER1,USER2, PYTHON # USER2 will cause involute to try to connect to pydev #DEBUG = 0x00080000 #EMC_DEBUG_REDIS #DEBUG = EMC_DEBUG_REMAP ... The DEBUG without the comment tag # is the active tag. Change to taste. The debug messages show up in a terminal session, so start LinuxCNC from a terminal. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/ ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
