I went out to measure what I have - One is 50mm wide, and 2 more at 75mm wide. id of the coil is about 80mm i guess. They are new, but have sitting around and there is some light rust in a few spots. Paul
----- Original Message ----- From: "andy pugh" <[email protected]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Tuesday, October 27, 2015 8:45:38 AM Subject: Re: [Emc-users] Spiral spring covers On 27 October 2015 at 15:35, Dave Caroline <[email protected]> wrote: > These are not much more than a version of a plain clock spring. I > imagine a bit of modification to a large clock spring I am rather committed to one that is 50mm wide, which would be quite a big clock spring. > or get a spring > from one of the pull out barriers used in public areas trade name was > tensator iirc I imagine that those are quite small, seat-belt sized at a guess. I rang DQR who import theirs from Germany, and the price came in as £41 each. Quite a difference. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
