Hi, Any reason why you won't push the tool holder outwards once it clears the carousel so that when it arrives under the spindle it's already fully extended? Would save time on tool changes. Very nice though. John
> -----Original Message----- > From: Pete Matos [mailto:petefro...@gmail.com] > Sent: November-10-15 10:00 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Tool changer finally working on our mill project > > > Very nice Rick....color me jealous!! > > Pete > > On Tue, Nov 10, 2015 at 12:37 PM, Rick Lair <r...@superiorroll.com> wrote: > > > Here it is, after putting all the pieces together, and working the bugs > > out, I finally got the tool change working using Andy Pugh's carousel > > component to control the tool carousel, and a pretty healthy chunk of > > ladder logic to control everything else. All using Linuxcnc 2.7. > > > > Thanks for the help guys,,, > > > > https://youtu.be/HwXmZDTMeCA > > > > More video's to come > > > > > > -- > > > > Thanks > > > > > > Rick Lair > > Superior Roll & Turning LLC > > 399 East Center Street > > Petersburg MI, 49270 > > PH: 734-279-1831 > > FAX: 734-279-1166 > > www.superiorroll.com > > > > > > > > ---------------------------------------------------------------------------- -- > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > -- > Pete Matos > A and N Precision and Fabrication > Maryville, Tennessee > 865-236-8996 > ---------------------------------------------------------------------------- -- > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
