http://gnipsel.com/files/emc/probing.zip
On 12/14/2015 7:08 AM, Sarah Armstrong wrote: > send cradeks probe stuff , not seen them they may be better > > > On 14 December 2015 at 13:03, John Thornton <[email protected]> wrote: > >> Just looking at the probe routines in the samples and I find a couple of >> surface mapping routines and a subroutine probe-hole.ngc with no >> comments so not sure what it does. Tom just shared Cradek's probe >> routines so I'll look at them for a bit. >> >> JT >> >> On 12/14/2015 6:41 AM, Sarah Armstrong wrote: >>> it looks as if it's the same package you have looked at . done by the >> guys >>> over on the russian site >>> theirs some probe stuff in the ngc folder . >>> >>> i have some too that might help , i'll dig them and emails shortly all >>> being well >>> >>> On 14 December 2015 at 12:32, John Thornton <[email protected]> wrote: >>> >>>> Crumb, I hit delete on your reply and it does not show up in the trash >>>> folder... which probe screen are you talking about? >>>> >>>> JT >>>> >>>> On 12/14/2015 6:02 AM, John Thornton wrote: >>>>> With a probe on the way and after viewing a few probe screens which >> seem >>>>> to all be way to complicated for the job it made me wonder what >>>>> practical probing routines people would actually use on a mill to >>>>> machine parts with. I came up with a few but having never probed a part >>>>> I'm looking for input from those that have probes now. >>>>> >>>>> Measuring a part. >>>>> Measure a hole. >>>>> Measure a pocket. >>>>> >>>>> Re-Machining >>>>> Locate a hole. >>>>> >>>>> Setup >>>>> Find the top of material. >>>>> Check that the vise is square. >>>>> Center the probe stylus. >>>>> >>>>> JT >>>>> >>>>> >> ------------------------------------------------------------------------------ >>>>> _______________________________________________ >>>>> Emc-users mailing list >>>>> [email protected] >>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>>> >> ------------------------------------------------------------------------------ >>>> _______________________________________________ >>>> Emc-users mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>> >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
