Yep that is what I meant, multiple configs with soft limits for each change in limits.
On my plasma because of the size I have a "Rapid to Home" button that I press before powering off so I'm close to the home switches. Of course that won't prevent manual moving but would put you in a known place for start up. JT On 5/7/2016 1:32 PM, andy pugh wrote: > On 7 May 2016 at 13:29, John Thornton <[email protected]> wrote: >> You don't home away from the chuck? > I rejected that idea on the previous lathe because of the tailstock. > I hadn't considered it on this lathe but it might be the answer. I > just have to remember to move the tailstock out of the way. >> I'm guessing multiple configs is out of the question for some reason >> like it's more fun to be inventive... > Multiple configs doesn't really help, as I only have one sensor. I > suppose i could consider taking the saddle apart again and installing > more, but I would much rather not. > > Or were you meaning configs with different soft-limits and relying on > them, with one general-purpose home sensor? > ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
