2016-05-29 23:49 GMT+03:00 a k <pccncmach...@gmail.com>: > Hi > the problem in setting G56 for example > > to set G56 in mm i input in MDI > G10 L2 P3 X-20. Y-10. Z -5. > this dimensions in mm. > when set G56 and input line above, how LCNC knows that i in mm. or in inch > ? > > maybe when one want to use mm. and set G56 .... need to be change INI all > into mm? >
What if you send G21 in MDI before all that? Also you can use RS274NGC_STARTUP_CODE = G21 in INI file. http://linuxcnc.org/docs/2.6/html/config/ini_config.html#sub:RS274NGC-section ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
