What kind of plasma torch do you have? JT
On 9/9/2016 5:59 PM, Alexander Brock wrote: > On 09/09/2016 10:58 PM, John Thornton wrote: >> Most LinuxCNC users use this one as do I. >> http://mesaus.com/index.php?route=product/product&path=65&product_id=64 >> or >> http://mesaus.com/index.php?route=product/product&path=65&product_id=65 >> depending on your plasma torch. > Thank you for your answer :-) > > I have a HF arc start with pilot arc functionality, there are 3 cables: > - thick cable for +, connected to torch > - thinn cable for pilot arc ignition, also connected to torch > - thick cable for -, connected to clamp which I attach to the material I > want to cut. > > Do I need 2 of the AD converters to monitor cutting arc and pilot arc? > What would be an appropriate resistor to protect the THCAD? > > Best Regards, > Alexander > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
