That is the pinout between the control and the drive. The drive doesn't have any direct encoder input.
On Tue, Oct 11, 2016 at 6:33 PM, andy pugh <bodge...@gmail.com> wrote: > On 11 October 2016 at 23:24, Erik Friesen <e...@aercon.net> wrote: > > omehow these amps have to figure power and > > location for the bldc phase, > > Is that the pinout between the motors and the drive? Or is it the > control signal to the drive? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users