2016-10-17 9:50 GMT-03:00 craig <cr...@facework.com>: > I don;t know what resources you have there. > > Minimum equipment approach > > 1 Heat the plastic and pour the rectangular shape oversize, Possibly > flattening down and spread it out as > you do. (How much it spreads naturally will be dependent on both > material and surface temperature. > If you have a big enough machine you want to use it to control the > pour path. > 2 cut off the edges and recycle the material with mill or saw. > 3. mill the top if the flattening does not leave the right height. > 4 possibly heat polish (slightly melt the surface) the form if glossy > surface it more important than sharp rectangular edges. > > You may want to reverse steps 2 and 3 and heat polish the top for a > glossy surface before cutting the edges. >
Is it possible to pour PVC as you would do with molten metal? I mean because of the viscosity of the plastic at that temperature I always thought the only solution is to apply pressure wheter extruding it or injecting it. -- *Leonardo Marsaglia*. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
