On Monday 31 October 2016 18:55:32 W. Martinjak wrote: > Good Morning Gene, > > >> BTW: This is a pure linuxcnc project except the kernel. > >> Please download the kernel and the kernel-header with this links: > >> > >> http://deb.machinekit.io/debian/pool/main/l/linux-rt/linux-image-rp > >>i2- rt_4.4.4-rt9-v7+-7_armhf.deb > >> http://deb.machinekit.io/debian/pool/main/l/linux-rt/linux-headers- > >>rpi 2-rt_4.4.4-rt9-v7+-7_armhf.deb > > > > I'd assume these two lines go in /etc/apt/sources.list? Not done > > yet. > > No I would not. > I hope sometime linuxcnc can provide it. > > But you can add: > > deb http://buildbot.linuxcnc.org/ jessie master-sim > deb-src http://buildbot.linuxcnc.org/ jessie master-sim > > and then executing > > sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key E0EE663E > sudo apt update > sudo apt upgrade
Seemed to do ok. And linuxcnc ran a g76 routine in the sim just fine. But I am concerned, this r-pi 3 isn't stable since putting it on the RT core, I have had 4 crashes already. > >> there is a /boot/config.txt > >> > >> in this file change or add the line: > >> > >> kernel=kernel_rt-4.4.4-rt9-v7+.img > > > > There is no similar line in that file now. > > Yes therefore I wrote "change OR add". :) > > btw: > #If it is not there, add this to the config.txt > > enable_uart=1 > force_turbo=1 #Voids warranty! > temp_limit=75 #Will throttle to default clock speed if hit. > gpu_mem=128 > > and please order something like this: > > https://www.amazon.com/Addicore-Raspberry-Heatsink-Aluminum-Sinks/dp/B >00HPQGTI4 > > its nesessary with the settings above. > > > Cheers, Gene Heskett > > Cheers Matsche Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
