On Sunday 14 May 2017 11:22:36 Tim wrote: > Gene Heskett > > Here is a link to download the rpi image that I am using. > > https://1drv.ms/u/s!Aq1_XHea_sjcuzkbKsQ-awCayRGc > <https://1drv.ms/u/s%21Aq1_XHea_sjcuzkbKsQ-awCayRGc> > Cooming in now.
> After extracting image you will need at least a 6GB sdcard or larger > for install. > > Then run in terminal > > sudo dpkg-reconfigure keyboard-configuration > > Pick the brand keyboard that best matches what you are using > Then run in terminal > > sudo raspi-config > > and enable SPI then reboot Does your 2.7 have the hm2_rpspi.so driver in the same directory as all the other hal modules? > > You will have to install Linuxcnc from build -bot I left this to you I > do not know > which version you have been using. 2.8.0-pre from jessie master-sim > Tim March > PS Sorry it took so long to set up download for you but it took > some doing to figure out what would work for free. I appreciate it, thanks, I'll see about doing another 64Gb card tomorrow, as I've some housework to catch up on, the missus is still recovering slowly from a broken hip. And I've about 5 years on her at 82. I'm a retired television engineer, CET and a bunch of other stuff. So I'm the Chief cook and bottle washer these days. Her recovery is being impeded by COPD as she's wearing an oxygen generator hose quite a bit of the time. Thanks Tim. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
