I Want to sharpen a band saw mill blade which has a 10 degree tooth angle.
Will be using a 1/4" Dia. stone in the spindle and following the shape
of the blade.
Then indexing to the next tooth.
I will try g15 and g16 even though they are not on the reference list.
On 17-06-19 09:18 PM, Stuart Stevenson wrote:
Yes, it will probably use the same g code you see for other systems
Which 10 degree angle do you want?
On Jun 19, 2017 7:29 PM, "jim" <james.a.wil...@gmail.com> wrote:
I need my machine to move On a 10 degree line using the x y axis .
I see g codes for this on other systems .
Can Linuxcnc do this?
Thank you,
Jim
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
