> > I assumed all added symbols should have loadrt and a thread but this is not > > always the case. > > There are only really three options in common use. loadrt / addf to > the base thread, loadrt / addf to the servo thread and loadusr. > > One way to handle that might be to drop the functions into one of > three re-sizable panes on the screen.
No I think the functions should be in the block they belong to. - Thread is connected to a pin so an attribute attached to the actual pin is a natural choice. - Loadrt is used to load the hal module corresponding to the symbol but all instances of one type is usually loaded at once. - Loadusr I have not yet looked at. I think I choose some manual work with the attributes to start with, these may stay to manually override default behaviour later. Hierarchy almost work if hierachical path is removed, it still make sense since simpler overview is possible. Output pin seems to have problem for some reason and produce wrong netlist. In a little bit more than one day not more could be expected. Nicklas Karlsson ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
