Response received via Forum, thank you.
On 7/26/2017 10:48 AM, emc-users-requ...@lists.sourceforge.net wrote:
Send Emc-users mailing list submissions to
emc-users@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/emc-users
or, via email, send a message with subject or body 'help' to
emc-users-requ...@lists.sourceforge.net
You can reach the person managing the list at
emc-users-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Emc-users digest..."
Today's Topics:
1. external control on jog speed (claude)
2. Re: external control on jog speed (andy pugh)
3. Banggood.com stuff any good? (Gene Heskett)
4. Recommendation for XHC-HB04 pendant driver enhancement
(Hugh Wylie)
----------------------------------------------------------------------
Message: 1
Date: Tue, 25 Jul 2017 20:04:50 +0200
From: claude <men...@bluewin.ch>
To: Emc-users@lists.sourceforge.net
Subject: [Emc-users] external control on jog speed
Message-ID: <fc3f9c1b-785d-2cea-6290-7deb21d41...@bluewin.ch>
Content-Type: text/plain; charset=utf-8; format=flowed
Hi,
Working on the retrofit of a lathe. Things are going pretty fine,
machine is already producing some parts, but I got a problem I don't
find any issue.
The machine use potentiometer to get override spindle speed, override
feedforward, and maxTravelSpeed. This is working nicely with halui
connection, and the maxTravelSpeed is really useful to slow down machine
when it come scary.
Unfortunately, this does not work for jog move on Axis, as well as it
don't work for homing. I would like to have this maxSpeed setting to be
always the max possible speed for the machine. Is it possible, shall I
applies modifications ? For jog move, this is quite dangerous, as you
have the feeling that the machine will move slowly, but no, I can go
full throotle (depend on Axis slider).
Best regards,
Claude
------------------------------
Message: 2
Date: Tue, 25 Jul 2017 20:02:38 +0100
From: andy pugh <bodge...@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] external control on jog speed
Message-ID:
<CAN1+YZVxqoQOUFc0K_cSrTvfo-Apn=xhkkypcx9doprncge...@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
On 25 July 2017 at 19:04, claude <men...@bluewin.ch> wrote:
Unfortunately, this does not work for jog move on Axis, as well as it don't
work for homing.
Which Halui pins are you using?
You probably need to connect both halui.rapid-override and
halui.max-velocity (and setp the corresponding direct-value pins to
true)
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
