>Have you seen: >http://linuxcnc.org/docs/2.7/html/man/man1/linuxcncrsh.1.html <http://linuxcnc.org/docs/2.7/html/man/man1/linuxcncrsh.1.html>
Yes I know, work but is not the best solution for control several machines. I try to make a remote interface using linuxcncshr but the result war not so nice ... Any how not find linuxcncrsh.cc file in linuxcnc-dev folder .... maybe reading that code can help me to midufy correctly remote-halui.cc bkt 2017-09-26 9:00 GMT+02:00 theman whosoldtheworld <[email protected]>: > >Seems suitable to run machine from computer program, I guess it could be > used to control several machines from a computer. > > these is the pourpose ... > > bkt > > > 2017-09-26 6:31 GMT+02:00 Nicklas Karlsson <[email protected]>: > >> > On 25 September 2017 at 00:20, theman whosoldtheworld >> > <[email protected]> wrote: >> > > hi at all, >> > > >> > > i try to manage halui.cc to perform a remote-halui.cc using >> ethernet/ip >> > >> > Have you seen: >> > http://linuxcnc.org/docs/2.7/html/man/man1/linuxcncrsh.1.html >> >> Seems suitable to run machine from computer program, I guess it could be >> used to control several machines from a computer. >> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
