------ Original Message ------
From: "andy pugh" <[email protected]>
To: "Marius Liebenberg" <[email protected]>; "Enhanced Machine
Controller (EMC)" <[email protected]>
Sent: 2017-11-28 12:11:59
Subject: Re: [Emc-users] How to setup a system for Uspace
On 28 November 2017 at 07:01, Marius Liebenberg
<[email protected]> wrote:
Someone suggested that I use the latest live CD image from here
(http://www.linuxcnc.org/testing-stretch-rtpreempt/linuxcnc-stretch-uspace-amd64-r9.iso)
This I did only to discover that they used an old version of Gmoccapy
on
this distribution which naturally will fail as it does not include
the fixes
that the author done on later versions.
Once you have the system set up it should be easy to update LinuxCNC
from the Synaptic Package Manager.
But, I would expect that image to install LinuxCNC 2.7.11 anyway. What
makes you think that there are problems with Gmoccapy?
(If there are, then that should be driving another bug-fix release)
These bugs are fixed already in the latest release of Gmoccapy but the
version of Gmoccapy that was included in the build is very old (version
1.5.8) and we now stand at version 2.x.x already.
I concurred with Nortbert on this.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
