A warning would be nice. A warning with option to continue with spindle slowed would be a bonus. -Tom
> On Feb 7, 2018, at 4:43 PM, andy pugh <bodge...@gmail.com> wrote: > > On 7 February 2018 at 20:02, John Kasunich <jmkasun...@fastmail.fm> wrote: > >> >> LinuxCNC will NOT reduce the spindle speed based on the limits of your Z >> axis. > > > That is true currently. But might not always be so, there is a proposal to > either warn or reduce the spindle speed. > > https://github.com/LinuxCNC/linuxcnc/issues/167 > > (I vote to include it) > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
