Thanks. I guess I won't mount any screens or stuff that would prevent it from tilting.
John > -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: May-08-18 4:47 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Mill Head Travel. > > On 9 May 2018 at 00:20, John Dammeyer <jo...@autoartisans.com> wrote: > > For those who have done a CNC conversion on these machines, are those > features every used anymore? Or is the head trammed in as close as > possible and then left there forever? > > Most work is done with the head vertical, but I have been grateful to > be able to tilt it occasionally. > > Here is one odd setup that I used in conjunction with a coordinated XZ > move. > https://photos.app.goo.gl/6cFnXnSm4SDRsU8t7 > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > � George Fitch, Atlanta Constitution Newspaper, 1916 > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
