On 12/17/2018 04:19 PM, Gene Heskett wrote:
I have one last problem, I can't get a G42 to "take"
despite the fact
that the next move is 2x+ the tool diameter.
<snip>
Am I crazy or is this a bug? Do I need to waste some stock
to find out?
You need to make a spring-loaded ballpoint pen holder and a
platen to hold a piece of paper. That's what I did when I
was first figuring out cutter radius offsets.
See section 3 here :
http://linuxcnc.org/docs/2.7/html/gcode/tool-compensation.html
(I used to have a few paragraphs and drawings in there, but
it seems to have been removed. But, what is there conveys
the same info, I think.)
Jon
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users