-------- Forwarded Message --------
Subject: Re: [Emc-users] ER ATC tool idea
Date: Fri, 19 Apr 2019 17:15:50 +0700
From: TJoseph Powderly <tjt...@gmail.com>
To: Andy Pugh <bodge...@gmail.com>
Gene,
On 04/19/2019 06:52 AM, Andy Pugh wrote:
On 19 Apr 2019, at 00:47, Ken Strauss <ken.stra...@gmail.com> wrote:
there is no obvious way that the threads would achieve that level of
concentricity.
You can still register on the taper. Solid “collets” and off-the-shelf
nuts seem so obvious that I am puzzled that I have never found them.
It solves the tool length puzzle at a stroke.
here's your chance to make use of that induction heater thread from a
while back.
you could make solid collets for heat shrink tooling :-)
heck, they could be solid collet-nuts
no concentricity problems ( except in manufacture , got a jig grinder ? )
_______________________________________________ Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
tomp
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users