sorry, but you try to have 1 Lcnc machine + 2 pc with rtethernet for control Lcnc? It is real necessary? Or you have 2 or more different Lcnc pc tat counicate each other with rtethrnet?
Il giorno mer 1 mag 2019 alle ore 20:41 Gene Heskett <[email protected]> ha scritto: > Greetings all; > > The one that works is on an old Dell. The one that is unresponsive to the > exact same treatment is this machine. The major diff is probably the > driver, but this wheezy's forcedeth has just worked for several years. > > forcedeth is loaded according to an lsmod. And the only way I can get > any tracing is by inserting echo's in the start scripts and they still > tell me zip. The closest to an error msg in trying to restart > networking after editing either the setup file > in /etc/network/interfaces.d or from playing with the stuff the > configurator icon runs if right clicked and select edit, at the top > right of the screen is from RTNETLINK, saying file exists. > > No other clues. I can't even strace it because I've no way to install > strace w/o a network. I don't recall if I installed strace manually, but > it is installed on the machine that works. > > Has anyone got any ideas of how to make the network startup verbose > enough to give usefull info? > > Thanks all. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
