Break the link to the old software so the Wheezy isn't where google thinks it is. Then also fix the getting-started doc. Don't need to do anything with google.
John > -----Original Message----- > From: Dave Matthews [mailto:n36...@gmail.com] > Sent: July-02-19 3:33 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Debian 9 / LinuxCNC iso? > > Perhaps there is a way to correct the documentation that is pointed at > by Google? That way the correct answer would be found from either > route. > > Dave > > On Tue, Jul 2, 2019 at 5:43 PM andy pugh <bodge...@gmail.com> wrote: > > > > On Tue, 2 Jul 2019 at 20:54, Dave Matthews <n36...@gmail.com> wrote: > > > > > > No, I was looking at the downloads page I could find with Google. > > > http://linuxcnc.org/docs/html/getting-started/getting-linuxcnc.html > > > > The correct link is the one you get if you click the "Downloads" link > > on the LinuxCNC.org home page. > > > > It is unfortunate if Google suggests a different link. > > > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed for the especial use of mechanical geniuses, daredevils and > > lunatics." > > � George Fitch, Atlanta Constitution Newspaper, 1916 > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users