Currently my MESA 792H is configured with DB25-14 and DB25-1616 set as Spindle PWM and Spindle Direction on the P2 connector using the MESA 7i92_C11Gx2D.pin file. I don't have the hardware set up yet for step/dir on the P1 connector to access StepGen #5.
1 0 IOPort None 14 1 IOPort PWM 0 PWM (Out) 2 2 IOPort StepGen 0 Step/Table1 (Out) 15 3 IOPort None 3 4 IOPort StepGen 0 Dir/Table2 (Out) 16 5 IOPort None Is it possible to create a version of the FPGA configuration that lets me use the HAL file to set P2 pins 1,3 to say StepGen #5 _OR_ PWM. Or if I want StepGen #5 on P1 and just I/O on P2 pins 2,3 will I need something other than the MESA 7i92_C11Gx2D.pin file depending on whether I want PWM or StepGen? Thanks John _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
