We had some Allwinner devices running LinuxCNC back in '13-'14. Back
then the mali GPU was still closed and there was no info on the
integrated microcontroller. Machinekit could have used these and come up
with a working system as well. Nice to see that have the ARISC core
going now for software stepping. It is similar to the PRU's in the BBB's
ARM SOC.
On 5/10/20 8:26 AM, Thomas J Powderly wrote:
A few months back, there was wprk on 'orangepi-cnc'
Which was linuxcnc running on the orange pi platform(s).
It has come back to life ( Nick and MX Maxter are comitting again )
Some new code uses a risc co-processor.
Some other platforms are also built for ( cubie, banana )
I doubt the risc hardware is available on other platforms.
but, This may be of interest to emc-users
https://cnc32.ru/orangecnc/
tomp
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
