On Wed, 3 Jun 2020 at 22:46, andrew beck <[email protected]> wrote:
> > the max power the servo drive can control apparently is 2200w so the servo > drive is slightly under powered. There is a video here: https://www.youtube.com/watch?v=24LftGNp4MI of an STMBL running at 5.8kVA. But there are many caveats to this: 1) You can't get one 2) If you get most of one, there are no power drivers. 3) They need configuring, a whole other HAL. 1 and 2 might improve. They might even improve soon-ish. (I am not privy to the machinations of the developers) STMBL is the perfect LinuxCNC retrofit drive, and might have Taken Over The World had the power driver not been discontinued. (Just at the point where the developers had enough drives for _their_ needs.) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
