________________________________
From: Gene Heskett
> motor_shaft = 5.2; // NEMA17 motor shaft exact diameter = 5
>Go ahead, set this to 10.0 or above, nothing happens when you click on
>render.
> m3_dia = 3.2; // 3mm hole diameter
> m3_nut_hex = 1; // 1 for hex, 0 for square nut
> m3_nut_flats = 5.7; // normal M3 hex nut exact width = 5.5
> m3_nut_depth = 2.7; // normal M3 hex nut exact depth = 2.4, nyloc = 4
[...]
I not sure if I grok Openscad, so I did a little looking. It will make .stl
files like this:
https://all3dp.com/2/convert-scad-files-to-stls/
or this:
https://anyconv.com/scad-to-stl-converter/
somebody said that it cannot import .stl files, so maybe this guy is mistaken?
https://www.youtube.com/watch?v=XqhDK21xKeM
You can do stuff with scripts like this:
https://www.youtube.com/watch?v=8_du7zzQLds
This makes the whole thing clearer
https://hackaday.com/2013/12/11/3d-printering-making-a-thing-with-openscad/
Now I'm wondering if it can import stuff from FreeCad.
Martin
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
