On Wed, 24 Jun 2020 at 17:55, Gene Heskett <[email protected]> wrote:
> If I interrupt that signal path with an and2, and drive the 2nd input > with a timer set to be a 555 like oscillator It might be worth considering having a single "flash" and feed that in to a mux that drives the pins you want to flash. It feels like you should be able to use an edge or oneshot feeding in to itself. But I had a quick play with edge and couldn't figure out how to set it going. So the clock signal out of siggen is probably the easiest, if not the lowest-cpu). It should run in the servo thread anyway. For an on-screen message: http://linuxcnc.org/docs/2.7/html/man/man9/message.9.html -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
