It might be worth adding a slower de-acceleration value for the spindle as a heavier tool may trip the servo. Cheers Peter
Peter Homann - (from my mobile) http://www.homanndesigns.com > On 16 Jul 2020, at 7:48 am, John Dammeyer <jo...@autoartisans.com> wrote: > > Progress. Bergerda AC Servo driving the Spindle with a V belt still but at > least driving it. MESA 7i92H PWM, small module from China for 0V-10V. > S1000, F5 and M3 and M5 commands to start and stop. > > https://youtu.be/VvXMoC917O0 > > Next step somehow incorporate an encoder onto the spindle to close the loop > and the secondary break out board so I can use step/dir instead. > > Then cast some new pulley blanks and change to toothed belt. But for now > it's so much quieter than the 2HP single phase motor. > > John Dammeyer > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users