Hi Andy, In your second video you mention that the step generator for the rotary axis is tied to the spindle motion. What HAL pins need to be connected? Do you have an interface with a selectable ratio or do you just change the ratio in the HAL file?
Matt > On Jul 24, 2020, at 5:17 PM, andy pugh <bodge...@gmail.com> wrote: > > On Fri, 24 Jul 2020 at 21:43, andrew beck <andrewbeck0...@gmail.com> wrote: > >> How hard is it to set up the hobbing and is it something I can just change >> in and out as needed. My cnc mill would be perfect. > > Yes, my milling machine can be a vertical mill, a horizontal mill or a > gear hobbing machine depending only on which INI file I pick to start > LinuxCNC with. > Some HAL files are shared, some are config-dependent, but they all > share a tool table. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
