While I wouldn't want to discourage anyone from getting a CNC router or laser, as a little exercise in outside the box thinking, 3D printing these insulator sheets would be a fairly trivial exercise. I sometimes print first layer calibration test squares on a flat glass bed. Dial in the bed leveling and the single layer ABS prints peel off the bed and are very thin and tough. You could easily add layers to create whatever dielectric strength you need for your application, but I'd bet one layer would probably be enough for common purposes. These thin parts would print very quickly.
3D printers (filament and liquid resin) are quickly becoming my toolbox full of hammers and all of my problems are looking like nails to be smashed by 3D printed awesomeness. On 7/25/20 7:09 AM, andy pugh wrote: > On Sat, 25 Jul 2020 at 12:05, N <nicklas.karlsso...@gmail.com> wrote: > >> Square outline with four or six square holes is the most important but it >> might be I want to cover another surface with slighlty more complicated form >> and mor holes. Need only four of them right now for prototypes and maybe >> 30-40 later on. > Laser cutting (excuse to buy one?) > > Or laser-print the outline onto the film and then cut on the lines > with scissors. > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users