OK, I see it correct under the GUI section, but i was looking under the next section (G-Code Programming) that shows it with the older method.
Another question on this subject, In the touch-off window, is P0 just shorthand to touch off in the current workspace (G54, G55, etc)? --J. Ray Mitchell Jr. jrmitche...@gmail.com "Good enough is the enemy of excellence"author unknown On Fri, Aug 21, 2020 at 11:34 AM andy pugh <bodge...@gmail.com> wrote: > On Tue, 18 Aug 2020 at 16:11, jrmitchellj <jrmitche...@gmail.com> wrote: > > > > I just checked the 2.7 & 2.8 versions documentation, and they have the > same > > description as teh 2.9 version. > > And that should now be the same, but different. > http://linuxcnc.org/docs/devel/html/gui/axis.html > > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users