Thanks to all of you developers and users for this great work as always! A special thanks to Andy, wich in my opinion is a vital part of this project, without detracting the other developers of course.
El mar., 8 sept. 2020 a las 20:46, Phill Carter (<phillcarte...@gmail.com>) escribió: > Thank you Andy for all your hard work. > > > On 9 Sep 2020, at 9:35 am, Sam Sokolik <samco...@gmail.com> wrote: > > > > Awesome work everyone! Thank you andy for making it happen! > > > > On Tue, Sep 8, 2020, 6:31 PM andy pugh <bodge...@gmail.com> wrote: > > > >> I am pleased (and a little relieved) to announce the release of LinuxCNC > >> v2.8.0 > >> > >> This release has been a long time in development. The main new > >> feature, the separation of joints (actuators) and (cartesian) axes has > >> been in development since around 2010. > >> > >> This is one of the biggest updates to LinuxCNC ever. The changelog can > >> be viewed here: > >> https://github.com/LinuxCNC/linuxcnc/blob/2.8/debian/changelog > >> > >> Highlights include: > >> > >> * Joints-axes separation - mainly obvious as much better support for > >> gantries and their homing but also for robots and any other > >> non-cartesian system > >> * Reverse-run - negative feed-overide will now reverse along the > >> previous path - introduced for wire spark eroders, but I am sure you > >> will find other uses. > >> * Multiple spindle support - up to 9 spindles > >> * Tool table expanded to 1000 tools > >> * Packages available for Raspberry Pi 4. > >> * External offsets and Extra (not controlled by G-code) joints. - > >> G-code is not the only way to move things. > >> * QTvcp: New QT-based VCP framework > >> * QTdragon, QTlathe, QTtouchy, QTscreen - new GUIs based on QTVP > >> * Silverdragon: New gscreen based GUI > >> * plasmac: New full-featured Plasma cutter controller - with > >> integrated THC and a whole lot more. > >> * Massively expanded and improved Spanish translations of > >> documentation and manpages > >> * New Chinese translation of the "入门" (Getting Started) documentation. > >> > >> Installable packages are available for Ubuntu Precise and Debians > >> Wheezy, Stretch, Jessie and Buster (including Raspbian). Support for > >> Ubuntu Lucid has ended. > >> At the moment most supported platforms only work with the preempt-rt > >> kernels. > >> There is an experimental 64-bit RTAI kernel for those needing it. We > >> hope to mainline this soon, but help would be appreciated. > >> > >> More details of how to update here: > >> > http://linuxcnc.org/docs/2.8/html/getting-started/updating-linuxcnc.html > >> > >> For new installations, or to test-run the new version and OS on your > >> existing hardware without committing to an OS upgrade use the ISO > >> images and process described here: > >> http://linuxcnc.org/docs/2.8/html/getting-started/getting-linuxcnc.html > >> > >> > >> Many thanks to the following contributors, and to anyone else who has > >> submitted work or code to the project. > >> Alec Ari > >> Alexander Brock > >> Alex Joni > >> Alex Wigen > >> Al Smart > >> Andrea Ricchi > >> Andrew Kyrychenko > >> andypugh > >> Anthony Barney > >> Anton Midyukov > >> ascurtis > >> Balestrino > >> bebro > >> Bence Kovacs > >> Benjamin Brockhaus > >> Benjamin Weis > >> Bernhard M. Wiedemann > >> Bertho Stultiens > >> blazini36 > >> Boris Skegin > >> Brian Hicks > >> cascade256 > >> Chris Edwards > >> Chris Morley > >> Chris Radek > >> Colten Edwards > >> Curtis Dutton > >> Daniel Rogge > >> david > >> David Shore > >> Dewey Garrett > >> Eduard Kachur > >> Edward Tomasz Napierala > >> Ernesto Lo Valvo > >> Florian Kerle > >> Gergely Nagymate > >> Hannah Lau > >> Håvard Flaget Aasen > >> itai > >> itaib > >> James Waples > >> Jan Mrázek > >> jasen > >> Jeff Epler > >> Jim Craig > >> Jin > >> j.m. garcia > >> Joe Hildreth > >> John > >> John Kasunich > >> John Morris > >> John Thornton > >> Jon Elson > >> Kim Kirwan > >> Kurt Jacobson > >> Lars Bensmann > >> Les Newell > >> loopsun > >> Lorenz Neureuter > >> Lubomir Rintel > >> Luke Peterson > >> Mark Andrew Gerads > >> Markus > >> Mateusz Konieczny > >> Matsche > >> Michael Geszkiewicz > >> Michael Haberler > >> Mick > >> Moses McKnight > >> MrFouFou > >> Nicola Quargentan > >> Norbert Schechner > >> Oleg Pryadko > >> peter wallace > >> Phillip A Carter > >> Phillip Carter > >> pippin88 > >> Rene Hopf > >> Rick M > >> Robert W. Ellenberg > >> rolf > >> Rudy du Preez > >> Ruoxi Wang > >> Rushabh Loladia > >> sam sokolik > >> Sam Sokolik > >> Sebastian Kuzminsky > >> Sergey Alirzaev > >> Solitarily > >> sphasse > >> Stephen Wille Padnos > >> Sync > >> Tero Kaarlela > >> Thomas Burkhard > >> Tom Schneider > >> Trần Ngọc Quân > >> tseufl > >> TurBoss > >> Will Glynn > >> > >> > >> > >> -- > >> atp > >> "A motorcycle is a bicycle with a pandemonium attachment and is > >> designed for the especial use of mechanical geniuses, daredevils and > >> lunatics." > >> — George Fitch, Atlanta Constitution Newspaper, 1912 > >> > >> > >> _______________________________________________ > >> Emc-users mailing list > >> Emc-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users