Andy
I agree this seems more trouble than needed, but if you can get working G code
for an example it should help in fixing the post.
Could it be a problem with axis wrap (going past 359.999) in the formatting? I
understand you can program multiple turns on the rotary axis but what dose the
next move expect for an endpoint after rollover on actual position?
From A0 to A720 is two rotations but is the next line for two rotations A 720
or A1440?
Scott
On Monday, September 14, 2020, 4:30:45 AM CDT, andy pugh
<bodge...@gmail.com> wrote:
On Mon, 14 Sep 2020 at 04:38, Scott Harwell via Emc-users
<emc-users@lists.sourceforge.net> wrote:
>
> I found this it might help.
> Scott
> Rapid Rotary
Along the same lines, there is a filter file here that automatically
converts XY UV G-code to G93 based on which end is bigger.
https://forum.linuxcnc.org/38-general-linuxcnc-questions/35141-a-head-scratcher-for-me?start=10#120524
The only reason I mention this is that it runs automatically as the
G-code file is opened, rather than being a separate application.
(And, to be fair, this isn't an option for RapidRotary as it needs to
be able to query the working radius)
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
