but the cut object is the only selection that highlights it all. Is there a weld it all together step I've missed?
Hi Gene, I've only played with the path workbench a little when I was trying to work out g-code for a drag knife, a project I dumped because the hardware I set up wasn't going to work. I worked out a lot from videos posted by a guy that was (at least) partly responsible for the path workbench. I can remember that if you don't get it right from the outset, it's a pain to go back and "stitching" everything together correctly at the beginning is a big help. There are eight videos in the series and this is #0 The videos help a lot with navigation around menus etc. https://www.youtube.com/watch?v=jARnmuWm7n4 Tomorrow I'll look back through my experiments and see if I got human readable g code out of it. Regards, Martin _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
