Thanks Jon. Appreciate the help.
Dave
On 11/15/20 3:29 PM, Jon Elson wrote:
On 11/15/2020 04:48 PM, dave engvall wrote:
HI,
With *B*lack Friday on/coming I need a recommendation for a
motherboard that has good latency and a rock solid EPP port. Servo
application so that should relieve some of the constraints. It needs
to work with Jon's upwm and Peter's 7i34. Naturally it also needs to
be currently available. Any help would be massively appreciated. I'm
getting too old to fight iffy hardware.
My go-to is some of the older Dell Optiplex machines. You can get
these on eBay for $70 delivered with a little patience. Avoid any
with the i810 graphics, it causes crashes and hangups. You would need
a PCI plug-in graphics card to override that.
Anything up to the Optiplex 980 is fine, after that they dropped the
built-in parallel port.
For machines with PCIe, I get the Syba SD-PEX10005 card.
Jon
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
